Custom Tub Liners & Wall Surrounds

Universal Bath’s exclusive line of PVC bathtub liners and tub wall surround systems are ideal for multiple-unit renovations where looks, performance and cost are all critical. Tub liners install in 3-4 hours, turning an eyesore into an attractive, 100% sanitary fixture that won’t rust, chip, stain, discolor or mildew. These units will withstand years of use and abuse. Install in the morning, shower by evening.

Renovate multiple units without taking a bath!

Universal Bath Systems | Universal Plastics

Bath Wall Surrounds – Use Alone or with our Tub Inserts

Custom fabricated to meet existing field conditions – our .093 thick PVC Shower/Wall surrounds can extend from the top of your bathtub to the ceiling. Complete with ceiling and edge trim, this tub wall surround combines great looks with great performance.

Some highlights are as follows:

  • Seamless corners on our bath tub walls and shower walls ensure water tight integrity for years
  • Edge trim can extend to the floor along the tub skirt to protect exposed areas
  • Each bath tub or shower wall comes with a 7″ x 7″ surface mounted soap dish allowing for easy location of all grab bars
  • Easy cleaning – no grout lines to maintain, this smooth nonporous PVC stays looking new
  • .093 thick panels can be installed over ceramic tile, plaster or any hard surface

Custom manufactured PVC ceiling liners are also available.

In addition, one piece window liners and 4 piece window trim kits are available.

Please contact us for specific pricing.

Wainscot Panels

Our .090 thick wainscot panels extend up either 42″ or 48″ from the floor on any or all walls in the bathroom, and are capped with bull nosed trim. Wainscot panels protect the walls from water and abuse, therefore eliminating the need to keep painting these walls. Unlike ceramic tile, they are easy to keep clean.

Wall Surrounds – Before & After

Before Picture:

Universal Bath Systems | Universal Plastics

Bathroom fatigue – let’s face it – bathrooms get a lot of use. Bathtubs wear out, and ceramic tile has grout lines that can get pretty ugly. Universal Bath Systems tub inserts were designed to update an old bathroom with minimal “downtime.”

After Picture:

Universal Bath Systems | Universal Plastics

Fresh new look – installing a new custom fit bathtub liner and wall surround modernizes an old bathroom. Universal’s bathtub liners have a non-slip pattern on the bottom, and fit right over the existing bathtub. Ceiling height tub wall surrounds (shown here) can be installed right over worn out ceramic tile.

Edge Trim to floor

Universal Bath Systems | Universal Plastics

Extra protection-Standard on Model # LB-110-CEI tub wall kits, and available as an option on Model # LB-110-STD tub wall kits – the edge trim extends down along the bathtub on either side to protect this “high splash” area.

Universal Bath Systems | Universal Plastics

Bathtub Liners

Bathtub Liners made from 1/4″ thick material fit right over the existing worn out bathtub. Not a “one size fits all” product, bathtub liners are molded to fit the existing fixture.

Installation

Universal Bath Systems | Universal Plastics

Most bath tub liners are available as a one-piece or two-piece (separate skirt). This allows installations in smaller bathrooms without removing fixtures or interfering with baseboard heating. There is no need to move existing plumbing. Our drains and overflow plates connect directly to existing plumbing outlets. As the color is consistent throughout the PVC sheet, surface scratches and burns are easily repairable. Non-slip bottoms are also available. Seamless corners ensure water-tight integrity for years. Edge trim can extend to the floor along the tub skirt to protect exposed areas. Each wall comes with a 7″ x 7″ surface mounted soap dish allowing for easy location of all grab bars. Easy to clean with no grout lines to maintain, this smooth nonporous PVC stays looking new. .093″ thick panels can be installed over ceramic tile, plaster or any hard surface. Custom manufactured PVC ceiling liners are also available.

Bath Accessories

Universal Bath Systems | Universal Plastics

Universal Corner Caddy: Measures 20½”x8″x4½” deep: Fits neatly into corner. The height of the first shelf allows for shampoo bottles, while the smaller top shelf holds soaps and other bathing accessories.

Universal Bath Systems | Universal Plastics

Soap/Shampoo Holder: Measures 20½”x12″x4½” deep: Comfortably holds up to three standard sizes shampoo bottles with a separate shelf for soap and other bathing accessories.

Universal Bath Systems | Universal Plastics

Standard Bath Soap Dish: Measures 7″x7″x2″ deep: Universal standard soap dish is included with every Universal Bath Systems Tub/Shower Surround Wall Kit.

Dealer Inquiries

If your business involves the building or renovation of multi-family housing, college dormitories, military bases, large and small hotels/motels, or residential homes, contact us at 800-553-0120 to learn more about becoming a dealer of our products.

With 40 years of experience behind us, you can count on us being here when you need us.

Universal Bath Systems and their network of authorized dealers/installers offer professional installation of all Universal Bath System products. We manufacture to existing room conditions. This eliminates costly “on-site” labor during installation. We offer help in the preparation of specifications for bathroom renovations or new construction.

Need to cover existing tub seats? Faced with a window in the corner of the shower wall? Universal will design a system that will work for your situation. Our in-house design and fabrication specialists have the capabilities of custom designing our products to meet many unique job site conditions. We understand that renovation projects require flexibility in design. We will visit the job site and prepare shop drawings for your review.

General Specifications for Bathtub/Shower Wall Surrounds
General Specifications for Bathtub Liners with Tub/Shower Wall Surrounds

For information contact us.